User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

21.3.

To configure DHCP relay, first click the button found next to the DHCP Server option

to display the settings.

DHCP Relay Settings

Enable

Check this box to turn on DHCP relay. Click the icon to disable DHCP relay.

DHCP Server IP

Address

Enter the IP addresses of one or two DHCP servers in the provided fields. The DHCP

servers entered here will receive relayed DHCP requests from the LAN. For active-passive

DHCP server configurations, enter active and passive DHCP server relay IP addresses in

DHCP Server 1 and DHCP Server 2.

DHCP Option

DCHP Option 82 includes device information as relay agent for the attached client when

forwarding DHCP requests from client to server. This option also embeds the device’s MAC

address and network name in circuit and remote IDs. Check this box to enable DHCP

Option 82.

Once DHCP is set up, configure LAN Physical Settings, Static Route Settings, WINS

Server Settings, and DNS Proxy Settings as noted above.