User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

8.2 Captive Portal

The captive portal serves as gateway that clients have to pass if they wish to access the

internet using your router. To configure, navigate to Network>LAN>Captive Portal.

Captive Portal Settings

Enable

Check Enable and then, optionally, select the LANs/VLANs that will use the captive

portal.

Hostname

To customize the portal’s form submission and redirection URL, enter a new URL in this

field. To reset the URL to factory settings, click Default.

Access Mode

Click Open Access to allow clients to freely access your router. Click User

Authentication to force your clients to authenticate before accessing your router.

RADIUS Server

This authenticates your clients through a RADIUS server. After selecting this option, you

will see the following fields:

Fill in the necessary information to complete your connection to the server and enable

authentication.

LDAP Server

This authenticates your clients through a LDAP server. Upon selecting this option, you

will see the following fields:

Fill in the necessary information to complete your connection to the server and enable

authentication.