User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

Other Health Check Settings

Timeout

This setting specifies the timeout in seconds for ping/DNS lookup requests. The default

timeout is 5 seconds.

Health Check

Interval

This setting specifies the time interval in seconds between ping or DNS lookup requests.

The default health check interval is 5 seconds.

Health Check

Retries

This setting specifies the number of consecutive ping/DNS lookup timeouts after which the

Peplink Balance will treat the corresponding WAN connection as down. Default health

retries is set to 3. Using the default Health Retries setting of 3, the corresponding WAN

connection will be treated as down after three consecutive timeouts.

Recovery

Retries

This setting specifies the number of consecutive successful ping/DNS lookup responses

that must be received before the Peplink Balance treats a previously down WAN connection

as up again. By default, Recover Retries is set to 3. Using the default setting, a WAN

connection that is treated as down will be considered as up again upon receiving three

consecutive successful ping/DNS lookup responses.

Dynamic DNS Settings

Service Provider

This setting specifies the dynamic DNS service provider to be used for the WAN.

Supported providers are:

 changeip.com

 dyndns.org

 no-ip.org

 tzo.com

 DNS-O-Matic

Select Disabled to disable this feature.

User ID / User /

This setting specifies the registered user name for the dynamic DNS service.

Password / Pass /

This setting specifies the password for the dynamic DNS service.