User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

Wi-Fi WAN settings can be configured at Advanced>Wi-Fi Settings (or

Advanced>Wi-Fi WAN or some models).

Wi-Fi WAN Settings

Channel Width

Available options are 20/40 MHz and 20 MHz. Default is 20/40 MHz, which allows both

widths to be used simultaneously.

Bit Rate

This option allows you to select a specific bit rate for data transfer over the device’s Wi-

Fi network. By default, Auto is selected.

Output Power

This option is for specifying the transmission output power for the Wi-Fi AP. There are 4

relative power levels available – Max, High, Mid, and Low. The actual output power

will be bound by the regulatory limits of the selected country. Note that selecting the

Boost option may cause the MAX’s radio output to exceed local regulatory limits.