User's Manual

User Manual

http://www.pepwave.com

5.1 Installation Procedures

1. Connect the Ethernet port on the unit to the backbone network using an

Ethernet cable. The port should auto sense whether the cable is straight-

through or crossover.

2. Connect the power adapter to the power connector of the unit. Plug the power

adapter into a power source.

3. Wait for the status LED to turn green.

4. Connect a PC to the backbone network. Configure the IP address of the PC

to be any IP address between 192.168.0.4 and 192.168.0.254, with a subnet

mask of 255.255.255.0.

5. Using Microsoft Internet Explorer 6 or above, Mozilla Firefox 2.0 or above, or

Google Chrome 2.0 or above, connect to https://192.168.0.3.

6. Enter the default admin login ID and password, admin and public

respectively.

7. After logging in, the Dashboard appears. Click the System tab to begin

setting up your access point.