User's Manual

User Manual
http://www.pepwave.com
27
Copyright © 2015 Pepwave
Confirm
Authentication
Password
Re-enter the authentication password.
Privacy Protocol
Select None or CBC-DES as the SNMPv3 privacy protocol. When CBC-DES is
selected, an entry field will appear for the password.
Access Mode
Select Read Only or Read and Write as the SNMPv3 access mode.
Status
Use these controls to enable or disable SNMPv3 access.
7.1.6 Controller
In the Controller section, you can set up Peplink InControl or AP Controller remote
management.
Controller Management Settings
Controller
Management
Check this box to enable remote management.
Controller Type
Select Auto, InControl, or AP Controller as your remote AP management method.
When Auto is selected, your access point will automatically choose the appropriate
mode.