User's Manual

User Manual
http://www.pepwave.com
28
Copyright © 2015 Pepwave
7.1.7 Configuration
In section, you can manage and backup access point configurations, as well as reset
your access point to its factory configuration. Backing up your access point’s settings
immediately after successful initial setup is strongly recommended.
Configuration
Restore
Configuration to
Factory Settings
The Restore Factory Settings button resets the configuration to factory default
settings. After clicking the button, click the Apply Changes button on the top right
corner to make the settings effective. To save existing network settings when restoring
factory settings, check the Network Settings box before clicking Restore Factory
Settings.
Download Active
Configurations
Click Download to backup the current active settings.
Upload
Configurations
To restore or change settings based on a configuration file, click Choose File to locate
the configuration file on the local computer, and then click Upload. The new settings
can then be applied by clicking the Apply Changes button on the page header, or you
can cancel the procedure by pressing discard on the main page of the web admin
interface.