User's Manual

User Manual

http://www.pepwave.com

7.1.8 Reboot

This section provides a reboot button for restarting the system. For maximum reliability,

your access point can equip with two copies of firmware, and each copy can be a

different version. You can select the firmware version you would like to reboot the

device with. The firmware marked with (Running) is the current system boot up

firmware.

Please note that a firmware upgrade will always replace the inactive firmware

partition.

7.2 AP

Use the controls on the AP tab to set the wireless SSID and AP settings, as well as

wireless distribution system (WDS) settings.

7.2.1 Wireless SSID

Wireless network settings, including the name of the network (SSID) and security policy,

can be defined and managed in this section.