User's Manual

ManualsBrandsPismo Labs Technology ManualsElectronicsPepwave / Peplink / Pismo Wireless Product

User Manual

http://www.pepwave.com

Channel

This drop-down menu selects the 5GHz 802.11 channel to be used. If Auto is set, the

system will perform channel scanning based on the scheduled time set and choose the

most suitable channel automatically.

The AP One AC mini allows setting channels on the 2.4GHz and 5GHz bands, as shown

below.

Output Power

This drop-down menu determines the power at which your access point will broadcast.

When fixed settings are selected, the AP will broadcast at the specified power level,

regardless of context. When Auto is selected, the AP will adjust its power level based

on surrounding APs to maximize performance.

While single-radio models allow setting power output levels for one frequency band only,

the AP One AC mini provide output power settings for both the 2.4GHz and 5GHz

bands, as shown below.

Beacon Rate

This drop-down menu provides the option to send beacons in different transmit bit rates.

The bit rates are 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, and 11Mbps.

Beacon Interval

Set the time between each beacon send. Available options are 100ms, 250ms, and

500ms.

DTIM

Set the frequency for the beacon to include delivery traffic indication messages (DTIM).

The interval unit is measured in milliseconds.

RTS Threshold

Set the minimum packet size for your access point to send an RTS using the RTS/CTS

handshake. Setting 0 disables this feature.

Fragmentation

Threshold

Enter a value to limit the maximum frame size, which can improve performance.

Distance / Time

Convertor

This slider and text entry field can be used to interactively set slot time.

Slot Time

This field provides the option to modify the unit wait time before your access point

transmits. The default value is 9μs.

ACK Timeout

Set the wait time to receive an acknowledgement packet before retransmitting. The

default value is 48μs.

Frame

Aggregation

With this feature enabled, throughput will be increased by sending two or more data

frames in a single transmission.

Aggregation

Length

This field is only available when Frame Aggregation is enabled. It specifies the frame

length for frame aggregation. By default, it is set to 50000.

Max number of

Clients

Enter the maximum clients that can simultaneously connect to your access point or set

the value to 0 to allow unlimited clients.