User's Manual

User Manual
http://www.pepwave.com
43
Copyright © 2015 Pepwave
7.3 Network
The settings on the AP tab control WAN and LAN settings, as well as allow you to set
up PepVPN profiles.
7.3.1 WAN
This section provides basic and advanced WAN settings.
Basic
Keep Default IP
When enabled, this option maintains 192.168.0.3 as your access point’s IP address.
IP Address Mode
IP Address Mode options are Automatic and Manual. In Automatic mode, the IP
address of your access point is acquired from a DHCP server on the Ethernet segment.
In Manual mode, a user-specified IP address is used for your access point, as described
below.
Static IP Address
/ Subnet Mask
You can use these fields to specify a unique IP address that your access point will use to
communicate on the Ethernet segment. This IP address is distinct from the admin IP
address (192.168.0.3) on the Ethernet segment.
Default Gateway
Enter the IP address of the default gateway to the internet.
DNS Server
Enter the DNS server address that your access point will use to resolve host names.