User Manual

ENGLISH
13
16.    
Parts Required:
1 x Smoker Stack
(#4)
4 x Screw
(#B)
Installation:
Mount the Smoker Stack to the Gas & Pellet Cabinet with Lid Assembly.
Use: 4 pcs M5 x 12 screws.
17.     
Parts Required:
1 x Smoker Stack Cap
(#3)
Installation:
Mount the Smoke Stack Cap to the Smoke Stack
18.    
Parts Required:
2 x Screw
(#A)
Installation:
Attach M6x15 mm screws onto right side of the main chamber and leave
about 1/4 inch out.
Use: 2 pcs M6 x 15 screws
19.    
Parts Required:
1 x Side Table
(#10)
3 x Screw
(#A)
Installation:
Hang the right Side Table onto those two screws ans then push ahead to
seat on it.
Mount the Side Table to the Main Barrel / Hopper Assembly with another
three M6x15 mm screws.
Tighten the screws to ensure they are completely secure.
Use: 3 pcs M6 x 15 screws
20.     
Parts Required:
1 x Flame Broiler Main Plate
(#32)
1 x Flame Broiler Slider
(#33)
Installation:
Open the lid of Pellet Grill
IMPORTANT: If the main plate is resting on the base of the barrel, it is
installed incorrectly. Poor installation may result in damage to your main
grill barrel.
Continued on next page.
16
4
17
3
18
¼ IN
19
1
2
10
20
33
32
1
2
3