User Manual
ENGLISH
9
IMPORTANT: It is advised to read each step entirely before starting assembly on instructions. Do not tighten screws completely
until all screws for that step have been installed. Hardware combination involving a locking washer and washer should be
installed with the locking washer closest to the head of the screw.
1.
Parts Required:
1 x Bottom Shelf
(#21)
1 x Back-Right Leg
(#16)
1 x Front-Right Leg
(#18)
1 x Front-Left Leg
(#22)
1 x Back-Left Leg
(#25)
4 x Screw
(#A)
4 x Locking Washer
(#D)
4 x Washer
(#C)
Installation:
• Open the package box, take all the components out except the Gas & Pellet
Cabinet with Lid Assembly
.
• Mount the Back-Left Leg, Front-Left Leg, Front-Right Leg, and Back-Right Leg
to the Bottom Shelf.
Use: 4 pcs M6 x 15 screws, 4 pcs washer, and 4 pcs locking washer.
2. /
Parts Required:
1 x Cart Front Panel
(#23)
1 x Cart Back Panel
(#24)
8 x Screw
(#B)
Installation:
• Mount the Cart Front Panel between Front-Right Leg and Front-Left Leg.
• Mount the Cart Back Panel between Back-Right Leg and Back-Left Leg.
Use: 8 pcs M5 x 12 screws.
Parts are located throughout the shipping carton, including underneath the grill. Inspect the grill, parts, and hardware blister pack
after removing from the protective shipping carton. Discard all packaging materials from inside and outside of the grill before
assembly, then review and inspect all parts by referencing the parts list. If any part is missing or damaged, do not attempt to
assemble. Shipping damage is not covered under warranty. Contact your dealer or Pit Boss® Customer Service for parts: Monday
through Sunday, 4am - 8pm PST (EN/FR/ES).
service@pitboss-grills.com | Toll-Free: 1-877-303-3134 | Toll-Free Fax: 1-877-303-3135
IMPORTANT: To ease installation and avoid injury, use two people when assembling this appliance.
Tools required for assembly: screwdriver and level.
Tools not included.
22
18
16
25
1
2
24
23