Inc. Postal Equipment User Manual

7-12 SDC755A

7 • Maintenance

1. Line up the yellow tab with the yellow slot.

2. Slide the moistener tank into position on the mailing machine

base until the release lever snaps into position. See the figure at

right.

3. Resume operation.

Reinstall the Moistener Tank

Place the wick back into the shield.

5. Reinstall the wick and holder assembly into the moistener.

6. Reinstall the moistener. Push down on the blue release lever on

the moistener.

Removing the Shield and Wick

Wick

Shield

1. Remove the moistener

as described on page

7-10.

2. Pull up and remove

the shield and wick

from the moistener

tank.

3. Separate wick from

the shield. Clean the

wick in plain water,

and rinse thoroughly.

7. Separate wick from the shield. Clean the wick in plain water, and

rinse thoroughly.

Release

Lever

CLICK!