user manual

41
OfficeRight™ DI200 Operator’s Guide
Sheet Feeders A1 and/or A2:
Sheet Size Letter (8-1/2 x 11”) or Legal (8-1/2 x 14”)
Paper Weight 20 to 24 lb. bond
Capacity 80 sheets of 20 lb. bond maximum
Limitations DO NOT run NCR or litho/inkjet coated papers
Insert Feeder C (Optional):
Sheet Size Width: 5 to 8-3/4”
Depth: 3-3/8 to 3-7/8”
Material Weight Unfolded document: 18 lb. bond to 80 lb. card
stock
Trifolded document: 18 to 24 lb. bond
Capacity 60 Business Reply Envelopes, 24 lb. bond,
maximum
Type Suitable for pre-folded, single panel inserts,
business reply envelopes, etc.
Envelope Feeder B:
Envelope Size Number 10 only
Width: 9-1/2”
Depth: 4-1/8”
Envelope Weight 18 to 24 lb. bond
Capacity 60 envelopes, 24 lb. bond, maximum
Envelope Flap Type Executive (triangular) flap
Envelope Flap Length 1-1/4” to 2-1/4”
End Clearance End clearance between the contents (inserts)
and envelope must be a minimum of 1/4” on
each side (1/2” overall). Take this
measurement with all contents placed into the
envelope.
Depth Clearance The contents must allow a minimum clearance
of 1/4” below the flap crease after insertion
into the envelope.
Material Specifications
Reference“
Reference
05 A5 p33-46 6/16/03, 4:33 PM41