Installation and Handling Instructions

1a. PITT
®
cooking can safely be built into:
• Compact board (eg. Trespa)
• Solid Surface
• Quartz Composite (eg. Caesarstone, Silestone)
• Concrete
• Glass
• Natural stone (eg. granite, marble)
• Stainless steel
• Ceramics (eg. Neolith)
PITT
®
cooking should never be installed into solid wood and worktops with an HPL
top layer.
Additional requirements apply to Solid Surface. See chapter 3.
1b. The minimum thickness of the core material is
5
/
32
” (4 mm).
For Solid Surface, Quartz composite, compact board and natural stone applies a minimum
thickness of the core material (solid) of
25
/
64
” (10 mm).
For Top Side for all materials, a maximum thickness of 1
3
/
8
” (35 mm) applies.
The bottom of the core material needs to be completely flat, in order to bring the
heat conductor in full contact with the worktop.
1. Worktop material suitable for PITT
®
cooking
!
!
3
!