Installation and Handling Instructions

2c. The insides of the recess(es) should be smooth and even (fig. 5). Irregularities can
cause cracking (fig. 6).
Fig. 5 Fig. 6
2d. On the top and bottom of the recess(es) should be a facet of at least
3
/
64 x
3
/
64
” (1x1 mm) be
applied (with exception for Solid Surface) (fig. 7).
Fig. 7
Facet
2. Manufacturing recesses (cut-outs)
2e. Adhesive connections and/or interconnections should never intersect the recess(es). These
should have a distance of at least 9
27
/
32
” (250 mm) to the recess(es) (fig. 7 and 8).
Fig. 7 Fig. 8
5
9
27
/
32
”
3
/
64 x
3
/
64
”