User's Manual

8
BLACKVUE
Installation guide
1. Set the power switch to the OFF position.
Expansion Dashcam
DC in
OFF
Cigarette Hardwire
2. For DIY installation using a cigarette lighter plug power cable:
a. Plug the cigarette lighter plug power cable into the Ultra Battery’s DC in port. Plug the other end of the power cable
into the vehicle’s cigarette lighter socket.
Cigarette lighter plug power cable
b. Set the power switch to the Cigarette position. Proceed to step 3.
Expansion Dashcam
DC in
OFF
Cigarette Hardwire
Caution
When using a cigarette lighter plug power cable you must set the switch to Cigarette. If you set the switch to the Hardwire position when
using a cigarette lighter plug power cable it may result in product failure, overheating, ignition, etc.
or