Network IP Camera Pitta 310 user manual
FCC notice to users and product statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Contents Chapter 1. Getting Ready Before Using This User Manual................................2 Pitta 310 Overview ...................................................3 Checking the Pitta 310 Package Content.................4 Checking the main body of the Pitta 310..................5 Installing the Pitta 310 ..............................................6 Connecting Pitta 310 ................................................7 Installing the Software ..............................................
Getting Ready Before Using This User Manual Thanks for purchasing our Pitta 310 IP Network Camera. This is a user manual for H.264 IP Network Camera and the product mentioned here designates the H.264 IP Network Camera. Please go through the manual before installation and use of the camera. This manual along with the software and hardware explained here is protected by copyright law. x Read through all printed documentation and ensure that your system is compatible for your product.
Getting Ready Pitta 310 Overview The Pitta 310 series are high-tech IP Network Cameras that use H.264 codec technology to achieve high compression rates and clear picture quality by allowing for high frame rates to be transmitted through the network. By using the network, remote connection, monitoring, and control are possible from any location for simple use. The Pitta 310 series IP Network Camera guarantees performance and safety while offering various solutions through internet integration.
Getting Ready Checking the Pitta 310 Package Content Check the product and the accompanied accessories contained in the product package. x If there is any problem with the accessories, contact your local product distributor. x The accompanied accessories can be changed without prior notice.
Getting Ready Checking the main body of the Pitta 310 Check the main body of the Pitta 310. ✎ Description is based on Pitta 310W / 310WR. ✎ The figures presented may differ from the actual appearances of the product. 1 2 3 4 76 5 8 9 0 Front LED Red: Booting Green: Operating 2 AUDIO IN/OUT IN: Audio input port. You can connect a microphone. (Check the sound with a PC) OUT: Audio output port. You can connect a speaker.
Getting Ready Installing the Pitta 310 1 Connect the camera to the stand. ✎ Connect the antenna to the camera for Pitta 310W / 310WR. 2 Place a camera stand at the intended place. x Make sure that the LAN cable and power PXVW EH ¿JXUHG DW WKH LQWHQGHG SODFH 3 Connect the LAN cable and AC adaptor. 4 Adjust the camera angle.
Getting Ready Connecting Pitta 310 ❚ For wired camera 1 Connect the LAN cable to the [LAN] port. ✎ Use a cross cable for a direct connection between the PC and the camera only. Use direct LAN cable for using a router or switch hub. 2 Connect the AC adaptor to the [DC] terminal. - AUDIO - IN DC IN OUT WIRELESS ON OFF LAN RESET ANTENNA ✎ Use the provided AC adaptor. 3 Make sure that POWER LED and NETWORK LED is on.
Getting Ready Connecting Pitta 310 ❚ For wireless camera To connect the wireless camera, IP setting and wireless setting must be set before using. Once set up is done, disconnect the LAN cable and connect the wireless camera. 1 Connect the camera with the LAN cable. (T page 7) 2 Set IP address. (T pages 12~13) 3 6HW ZLUHOHVV FRQ¿JXUDWLRQ LQ 3LWWD :HE9LHZ (T page 19) 4 Disconnect the LAN cable. 5 Connect the antenna. 6 Turn on the WIRELESS switch.
Getting Ready Installing the Software Install the Pitta IP Utility and Pitta View software. 1 ,QVHUW WKH LQVWDOODWLRQ &' LQWR WKH &' GULYH 'RXEOH FOLFN WKH 6HWXS H[H ¿OH RQ WKH &' ✎ You can download this file from Pittasoft homepage (www.pittasoft.com). 2 Follow the instructions on the installation program to complete. 3 Check the Pitta IP Utility and Pitta View icon is created. 4 Double click the shortcut icon to start the software.
Getting Ready Installing the Software ❚ System requirement CPU Intel Pentium4 2.0Ghz or higher RAM Minimum 1GB (Recommanded 2GB) Network Ethernet 1024X768, 24bit color Graphic Card 128MB RAM (Recommanded 256MB higher) DirectX 9.0 or newer support, Direct Draw Overlay Support HDD Type E-IDE, SATA, SCSI, SAS HDD Space Minimum 80GB Free O/S Windows XP SP2, Windows Vista ❚ Re-installation If reinstallation is needed, current software has to be uninstalled.
Pitta IP Utility and Pitta Web View Pitta IP Utility guide Use Pitta IP Utility to change or verify the IP address of the camera. 1 Menu 2 Toolbar (Shortcut) 3 Camera List 4 Status bar ❚ Pitta IP Utility menu Menu File View Exit Toolbar Shortcut buttons. Status Bar Displays current status 4. Home Page Go to Pitta WebView home page. Properties Tools Help Features Close the Pitta IP Utility. ✎ This feature is an additional plan. Refresh Refresh the camera list.
Pitta IP Utility and Pitta Web View changing IP address ❚ Change IP address by selecting camera 1 Start Pitta IP Utility. Select the camera whose IP address needs to be changed. 2 Click button. 'Assign IP address', pop-up window appears. 3 Enter User ID and Password. ✎ Default initial values of administrator's ID and Password are admin/admin. You can change ID, Password in Pitta WebView. (T page 18) 4 Assign the IP address.
❚ Change IP address by serial number 1 Start Pitta IP Utility 2 Click button. 'Assign IP address', pop-up window appears. 3 Enter User ID, Password, Serial Number. ✎ Default initial values of administrator's ID and Password are admin/admin. You can change ID, Password in Pitta WebView. (T page 18) ✎ Camera Serial Number is located in the back of the product. 4 Set equal to 4~6 step page 12. ✎ Factory default setting is the DHCP mode : IP address will be automatically assigned.
Pitta IP Utility and Pitta Web View Pitta WebView Log-in Pitta WebView is the role of each camera's homepage. Set the camera or live view is possible through the internet. 1 Connect to the camera's homepage. x Method 1: To open Login page, enter IP address in the address bar of your web browser and press Enter. x Method 2: Select the camera and press the button in Pitta IP Utility. - Double-click on the camera or click the mouse right button and choose 'Home Page' then you can go to the login page.
Pitta IP Utility and Pitta Web View Pitta WebView Live View Page ❚ LiveView Press button. This is the live view mode. 1 2 3 4 5 8 76 NO. Item Features 1 Address You can check the IP address of the camera. 2 Homepage shortcut Open Pittasoft homepage. 3 Live view Live view screen. 4 Current Time Displays current time. Time can be set in Setup page. (T page 24) 5 Volume Adjust the volume. Make sure that Audio Feature is enable. (T page 17) 6 Save the image in JPEG or BMP.
Pitta IP Utility and Pitta Web View Pitta WebView Live View Page ❚ Setup Press button. Basic setting page. ✎ For more information, see page 17~25. ❚ Help Press button Pitta WebView help page. ✎ Press the 'Help' button on the setup page to get help and tips for the current page. ❚ Logout Press 16 button. You can use this to logout.
Pitta IP Utility and Pitta Web View Pitta WebView-Setup Menu ❚ Basic Camera Name Resolution Rotation Night Mode Video Quality Frame Rate Camera Name for assigning a name to the camera. Available to use up to 64 letters. Use this to set the size of image. x D1(720X480)/VGA(640X480)/CIF(352X288)/QVGA(320X240)/QCIF(176X144) Use this to rotate the display by 180°. x 0(floor)/180(Invert) Use this to get the better video quality in dark places. Use this to choose video display quality.
Pitta IP Utility and Pitta Web View Pitta WebView-Setup Menu ❚ Advanced 1 User Change Admin's ID and Password. Change User ID, Password and authority. ✎ You can use up to 4~32 (A-Z, a-z, 0-9,. _ available) and 4~10 (available to use all characters) to make ID and Password, respectively. ✎ Default initial values of administrator's ID and Password are admin/admin. ✎ If you forgot ID/Password, press 'RESET' button to initial setting. (admin / admin) All the settings will be changed to initial setting.
ⵑ DNS Setting x 2EWDLQ '16 VHUYHU DGGUHVV DXWRPDWLFDOO\ 6SHFL¿HV WKDW QHWZRUN DGGUHVV IRU '16 servers are automatically obtained from the network. If you select this option, the DHCP server provides DNS sever address information. x 8VH WKH IROORZLQJ '16 VHUYHU DGGUHVV 6SHFL¿HV WKDW QHWZRUN DGGUHVVHV IRU '16 VHUYHUV XVHG E\ WKH FDPHUD DUH PDQXDOO\ VSHFL¿HG ,I \RX VHOHFW WKLV RSWLRQ \RX must type the IP addressed for your DNS servers in Preferred DNS server and Alternate DNS server.
Pitta IP Utility and Pitta Web View Pitta WebView-Setup Menu 3 Video & Image Configuration ⵐ Video Setting x I frame interval: Use this to set I frame(Key frame) interval. If set lower value, quality will be better but, at higher bandwidth requirement. (1~60) x Bitrate: Variable bit rate: Bit rate is adjusted automatically according to the variation in the video images. &RQVWDQW ELW UDWH %LW UDWH LV ¿[HG regardless of the variation in the video images.
ⵑ Sensor Frequency Select one of the settings based on power frequency for proper sensor operation. ⵒ Exposure x Auto: Automatically adjusts exposure. x 0DQXDO ([SRVXUH LV ¿[HG ,I WKH YDOXH LV KLJKHU WKH LPDJH ZLOO EH EULJKWHU ⵓ Enable Night Mode Allow brightening video images when shooting in dark places. x Priority (Framerate/Image Quality): Adjust video images by giving priority to either frame rate or image quality. x Night Mode: Image become brighter as the value of this mode becomes greater.
Pitta IP Utility and Pitta Web View Pitta WebView-Setup Menu Setting motion detection area and sensitivity Set the area within the image. 1 Select the type of Window. x Included window: Motion detection area (Red Window). x Excluded window: Does not detect the movement area (Yellow Window). 2 Press Add button to add a window. x Add: Use this to add a window. x Delete: Use this to delete an area box. x Full window: Use this to delete a window.
5 -2 Event Upload 7KLV DOORZV VHWWLQJ XS QRWL¿FDWLRQ WR XVHU IRU PRWLRQ GHWHFWLRQ HYHQW YLD H PDLO IWS RU ERWK ⵐ Upload Schedule x Upload interval: Use this to adjust the time interval between two consecutive image transmissions when motion is detected. ✎ Be cautious that if the time interval is set to too short, video images may be broken because the camera is overloaded or the images may be considered as spam mails because images are too often transmitted.
Pitta IP Utility and Pitta Web View Pitta WebView-Setup Menu ⵑ New Server Time x Time Zone: Select the region where the camera is installed. (Ex. Region - Seoul, Time zone - EMT +09:00) ✎ Use this if the system is set to Synchronize with NTP server. x Time Mode: Use time mode to set camera system time. - Synchronize with computer time: Use this to synchronize camera time with user's PC time. - Synchronize with NTP server: Use this to synchronize camera time with NTP server time.
ⵒ Camera Firmware Upgrade How to upgrade the camera frimware 'RZQORDG XSGDWHG ¿UPZDUH ¿OH IURP support menu in Pittasoft homepage (www.pittasoft.com). &KHFN WKH ¿UPZDUH YHUVLRQ 2. Click 'Open' button and then select the XSGDWHG ¿UPZDUH ¿OH 3. Click 'Upgrade' button. Upgrade will run automatically ✎ Red LED will be flashing on the front of the camera during upgrade. ✎ The upgrade time takes up to 10 minutes. ✎ You must not turn off the camera during upgrade.
Appendix DDNS & Router Port Forwarding DDNS ''16 XVHV D VSHFL¿F GRPDLQ QDPH WR DFFHVV WKH GHYLFH ZKLFK KDV D G\QDPLF ,3 address. User can access the camera through the domain name, any dynamic IP address changes will be automatically updated by the camera's DDNS client with the DDNS server. Using the DDNS service x To use DDNS service, connect to PittaDNS (www.pittadns.com) or DynDNS (www. dyndns.com) and registered with one of the several free domain names.
Appendix Troubleshooting If there are problems in operation, please refer to the items below. If the problem still persists, please contact the agent you purchased this product from. Issue Solution Camera connection and x Please check the power connection. (Check the Power LED indicator) searching problem. x Please check the power supply. x Please check the network cable connection. x Please make sure the LAN cable is cross cable (PC connection) or general LAN cable (Switch Hub, Router connection).
Appendix Specification ❚ Pitta 310 Series Specification Imaging Device Pitta 310 Pitta 310R Pitta 310W Pitta 310WR 1/4” CMOS 1/3” CMOS 1/4” CMOS 1/3” CMOS Lens type Fixed Fixed Fixed Dome Fixed Dome Effective Pixels 1.3 Mega 320,000 1.3 Mega 320,000 Focal length I PP PPaLQ¿QLW\ 720x480 D1 640x480 VGA F-number F2.0 Field of View Changeable Max Resolution 720x480 D1 Max. Frame Rate 30fps Wide Dynamic Range (WDR) Codec 640x480 VGA - O O Video H.264, Audio G.
❚ Pitta WebView Specification LiveView ActiveX based LiveView with snapshot and full screen Basic (DV\ FRQ¿JXUDWLRQ IRU EHJLQQHUV Advanced $GYDQFHG FRQ¿JXUDWLRQ RSWLRQV IRU KLJK HQG XVHUV Setup Video resolutions 720X480 (D1) / 640X480 (VGA) / 352X288 (CIF) / 320X240 (QVGA) / 176X144 (QCIF) 9LGHR FRQ¿JXUDWLRQ )UDPH UDWH UHVROXWLRQ ELW UDWH , IUDPH LQWHUYDO FRQ¿JXUDWLRQ VHWWLQJV Maximum 3 Mbps bit-rate supported -3(* FRQ¿JXUDWLRQ &RQ¿JXUDEOH FRPSUHVVLRQ UDWLR User list Maximum 7 users (1 admin
Appendix Dimension 43mm Front 1mm Top 13 mm Right 30 PITTASOFT
MEMO
MEMO
Model Warranty Period Purchase Date Warranty Period Until Name Customer Contact Number Name Seller Contact Number YY MM DD YY MM DD 1 year After the Purchase
Pittasoft (Head Office) Address #1113, Newticastle, 429-1, Gasan-dong, Geumcheon-gu, Seoul, 153-779, Korea Hompage www.pittasoft.com TEL 02-2626-8800 Email FAX 02-2626-8805 product@pittasoft.
