Instructions / Assembly

EASY TO INSTALL
Visit pittsburghcorning.com or call 1-800-624-2120
To make sure your new
window will fit properly,
measure the window
opening as if the frame
were already removed.
You will need a space
of approximately
1
/4" to 1" all the way
around the perimeter
for mortar.
Remove the window
sash and then remove
the window frame by
bending the top and
bottom in toward the
center or by cutting it.
Remove the old mortar
sill if necessary.
Set the new window
into place on top of 2
wedges, check that it is
plum and level, then
secure it with 2 wedges
at the top. If you are
installing a vented
window, the vent latch
should be located on
the inside at the top.
Mix the mortar according
to the instructions on the
bag. Apply the mortar
around the perimeter
using a grout bag or a
trowel. Make sure the
joints are completely full.
When the mortar begins
to set, remove the
wedges, fill the holes,
smooth the joints with a
trowel and clean the
glass with a cloth.
These are general
instructions, due to
variations in window
construction your
installation may differ.
Privacy With Natural Light
Brightens rooms and eliminates the need for curtains
Efficient Sound Barrier
Reduces noise from outside and helps keep homes quiet
Versatile Window Solution
The ideal basement replacement window.
Great for bathrooms, kitchens, garages, door sidelights.
Quality Guaranteed
10-Year limited warranty against manufacturing defects
Thick, Break-Resistant Glass
Enhances home security
Thermal Efficiency
Reduces energy costs and helps keep homes comfortable
12
3
5
4
Tools & Materials List
• Safety Goggles • Level
• Work Gloves • Pre-mix Mortar
• Tape Measure • Clean Water
• Hammer • Trowel
• Pry Bar • Bucket
• Stiff Brush • Grout Bag
• Wood Wedges • Clean Cloth
GWBW-10
INSTRUCIONES
EN ESPAÑOL
AL REVERSO
INSTRUCIONES
EN ESPAÑOL
AL REVERSO