MSDS

PITTSBURGH CORNING GLASS BLOCK SEALANT AUGUST 18, 2006
Material Safety Data Sheet
Page 1 of 8
PAGE 1 OF 8
Section I – PRODUCT IDENTIFICATION
Product Name: Pittsburgh Corning Glass Block Sealant
Manufacturer/Supplier:
Pittsburgh Corning Corporation
800 Presque Isle Drive Information Number: 724-327-6100
Pittsburgh, PA 15239 CHEMTREC: 800/424-9300
Generic Name: mild odor, silicone sealant
CAS Number: N. AP. CAS Name: N. AP.
NFPA HAZARD CLASS: Health: 1 Fire: 1 Reactivity: 0
WHMIS CLASSIFICATION: CLASS D Division 2B
HMIS Rating: Health: 2 Flamibility: 1 Reactivity: 0
Use: Pittsburgh Corning Glass Block Sealant is a mild odor, silicone sealant for use with the Pittsburgh
Corning Glass Block Systems.
General Comments: General information and emergency information available 8:00 AM – 5:00 PM ET Monday
through Friday. CHEMTREC telephone number is to be used only in the event of chemical transportation
emergencies involving a spill, leak, fire, exposure, or accident involving chemicals. All non-emergency questions
should be directed to technical service.
NA = not applicable NE = not established UN = unavailable
Section II – COMPOSITION / HAZARDOUS INGREDIENTS
Ingredient CAS Number
% by
WT
ACGIH
*
TLV
OSHA**
PEL
OSHA**
STEL
OSHA**
CEILIN
G
NTP***
IARC
OSHA
Reg.
Silicone Polymer NJ TSRN#
51721300-5110P
>60
N. AV N. AV N. AV N. AV No
Polydimethylsiloxane,
trimethyl endcap
63148-62-9 15 – 40
N. AV N. AV N. AV N. AV No
Amorphous silica 7631-86-9 7 - 13 3mg/m
3
(respirable)
10mg/m
3
(inhalable
particles)
5mg/m
3
(respirable)
15mg/m
3
(total dust)
N. AV N. AV Yes
Methyloximino Silane NJ TSRN#
51721300-5202P
3 - 7
N. AV N. AV N. AV N. AV No

Summary of content (8 pages)