MSDS

PITTSBURGH CORNING GLASS BLOCK SEALANT AUGUST 18, 2006
Material Safety Data Sheet
Page 8 of 8
PAGE 8 OF 8
SECTION VIII - PERSONNEL PROTECTION INFORMATION ____
_
PERSONAL PRECAUTIONS: Observe all personal protective equipment recommendations described in
Sections VI and VII.
ENGINEERING CONTROLS:
LOCAL EXHAUST: Recommended
GENERAL VENTILATION: Recommended
PERSONAL PROTECTIVE EQUIPMENT:
EYE PROTECTION: Use proper protection, safety glasses as a minimum.
SKIN AND BODY PROTECTION: Wash at mealtimes and end of shift. If skin contact occurs, change
contaminated clothing as soon as possible and thoroughly flush effected areas with cool water. Chemical
protective gloves are recommended.
RESPIRATORY PROTECTION: Wear appropriate, properly fitted NIOSH/MSHA approved
respirator, as directed by an industrial hygienist when the airborne contaminant level(s) exceed the
exposure limits indicated on this MSDS.
HYGIENE MEASURES (INGESTION): Wash hands after handling and before eating.
Section IX – SHIPPPING INFORMATION
DOT Information (49CFR 172.101)
PROPER SHIPPING NAME: Not Applicable
DOT HAZARD CLASS: Not Applicable
UN / NA NUMBER: None
PACKING GROUP: Not Applicable
QUANTITY LIMITATIONS: Not Applicable
VESSEL STORAGE REQUIREMENTS: Not Applicable
While the information and recommendations set forth herein are believed to be accurate, Pittsburgh Corning Corporation
makes no warranty with respect thereto, and disclaims all liability from reliance thereon. IT IS THE RESPONSIBILITY
OF A RECIPIENT OF THIS DATA TO REMAIN CURRENTLY INFORMED ON CHEMICAL HAZARD
INFORMATION, TO DESIGN AND UPDATE ITS OWN PROGRAM AND TO COMPLY WITH ALL NATIONAL,
FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS APPLICABLE TO SAFETY, OCCUPATIONAL
HEALTH, RIGHT-TO-KNOW AND ENVIRONMENTAL PROTECTION.