MSDS

ProVantage Glass Block Grout December 7, 2004
Material Safety Data Sheet
1 of 4
SECTION 1  CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: ProVantage Glass Block Grout
Manufacturer/Supplier:
Pittsburgh Corning Corporation
800 Presque Isle Drive Information Number: 724-327-6100
Pittsburgh, PA 15239 CHEMTREC: 800/424-9300
Generic Name: polymer-modified tile grout
Consumer Product Safety Commission Statement: DANGER  CORROSIVE. SKIN, EYE AND
RESPIRATORY IRRITANT. CONTAINS
KNOWN OR PROBABLE HUMAN
CARCINOGEN. HARMFUL OR FATAL IF
SWALLOWED
NFPA HAZARD CLASS: Health: 3 Fire: 0 Reactivity: 0
Use: ProVantage Glass Block Grout is a fast-curing high early strength, polymer modified tile grout
designed for interior and exterior use with Pittsburgh Corning Glass Block
General Comments:
General information and emergency information available 8:00 AM  5:00 PM ET Monday
through Friday.
CHEMTREC telephone number is to be used only in the event of chemical transportation
emergencies involving a spill, leak, fire, exposure, or accident involving chemicals. All non-
emergency questions should be directed to technical service.
NA = Not Applicable or Not Available NE = not established
SECTION 2 PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Grey Powder Color: gray
Odor: General Cement odor Odor threshold: NE
Boiling Point (ºF.): NA Specific Gravity
(H
2
0 = 1): 1.60  2.00
Vapor Pressure
(MM Hg): NA
Percent Volatile
By Weight (%) NA
Vapor Density
(Air = 1) NA
pH: NE
Solubility in
Water: Negligible
Freezing/melting range: NA