Technical Specifications

Architectural Coatings Paramount Exterior Flat 100% Acrylic
GENERAL DESCRIPTION
PRODUCT DATA
PARAMOUNT
™
37-2510 Series
RECOMMENDED SUBSTRATES
FEATURES / BENEFITS
Paramount Exterior Flat paint is ideal for use on properly prepared
exterior wood, brick, masonry, concrete, weathered aluminum,
weathered vinyl siding and primed metal substrates.
Features
Premium paint & primer in one
Delivers true one coat coverage**
Exceptional adhesion to resist cracking and peeling
UV protection ensures true, lasting color
Provides a durable and washable protective shield
**One coat coverage only when tinted to colors from the
Pittsburgh Paints & Stains Paramount Color Palette.
PRODUCT TYPE: 100% Acrylic
GLOSS: Flat: 0 to 5 (60º Gloss Meter)
VOLUME SOLIDS*: 44% +/- 2%
WEIGHT SOLIDS*: 60% +/- 2%
VOC*: <50 g/L (0.4 lbs./gal.)
WEIGHT/GALLON*: 11.6 lbs. (5.3 kg) +/- 0.2 lbs. (91 g)
*Product data calculated on product 37-2510.
COVERAGE: 250 to 300 sq. ft./gal. (23 to 27 sq. m/3.78L)
Wet Film Thickness: 5.3 minimum to 6.4 maximum
Wet Microns: 135 minimum to 163 maximum
Dry Film Thickness: 2.3 minimum to 2.8 maximum
Dry Microns: 59 minimum to 72 maximum
Coverage does not include variation due to application methods,
surface porosity, and/or mixing. Film build, color and gloss may vary
depending on the substrate’s porosity. More porous substrates may
require a second coat to achieve a uniform appearance.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.
To Touch: 30 minutes
To Recoat: 4 hours
Dry time @ 35ºF (2ºC); 50% relative humidity.
To Touch: 3 to 6 hours
To Recoat: 24 hours
For optimum tannin blocking, allow the first coat to dry a full 24 hours
prior to application of a second coat.
Drying times listed may vary depending on temperature, humidity, film
build, color, and air movement.
CLEANUP: Clean tools and hands immediately with warm soapy
water.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
TINTING AND BASE INFORMATION
Refer to the appropriate color formula book, automatic tinting
equipment, and or computer color matching system for color formulas
and tinting instructions.
37-2510 White and Pastel Base
37-2515 Midtone Base*
37-2517 Neutral Base*
*Must be tinted before use.
Some colors, or drastic color changes, may require more than one coat
to achieve a uniform finish.
LIMITATIONS OF USE
Aluminum Ferrous Metal Vinyl
Brick Masonry Wood
Concrete Stucco
Apply only when air, surface, and product temperatures are
above 35°F (2°C) and at least 5°F (3°C) above the dew point. Air
and surface temperatures must remain above 35°F (2°C) for the
next 48 hours. Do not apply late in the day when dew and
condensation are likely to form or if rain or snow is expected. On
large expanses of metal, temperatures must be 50°F (10°C) or
higher.
Vinyl siding and similar plastic composites should not be painted
with a color darker than the original color. Painting vinyl siding or
plastic composites with a darker color may cause them to warp.
Do not thin.
PROTECT FROM FREEZING.
Not recommended for use on steps or floors.
While this product provides a mildew resistant coating, growth
may still occur if the substrate is not properly prepared prior to
painting and/or if the substrate is consistently exposed to
conditions conducive to mold, mildew, and algae.
PACKAGING
Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last page.
1-Gallon (3.78 L)
5-Gallon (18.9 L)
Not all products are available in all sizes.