Technical Specifications

Architectural Coatings Paramount Paint & Primer In One Interior Eggshell
GENERAL DESCRIPTION
PRODUCT DATA
TINTING AND BASE INFORMATION
Refer to the appropriate color formula book, automatic tinting
equipment, and or computer color matching system for color formulas
and tinting instructions.
37-3310 White/Pastel Base
37-3315 Midtone Base*
37-3317 Neutral Base*
*Must be tinted before use.
Some colors, drastic color changes, or porous substrates may require
more than one coat to achieve a uniform finish.
RECOMMENDED SUBSTRATES
Concrete/Masonry Block Plaster Wood
Gypsum Wallboard-Drywall Metal
T.D. 37-3310
FEATURES / BENEFITS
Premium paint & primer in one
Delivers true one coat coverage**
Provides a durable and washable protective shield
Exceptional stainblocking and hiding
**One coat coverage only when tinted in colors from the Pittsburgh
Paints & Stains Paramount Color Palette
Ideal for use on properly prepared interior walls, ceilings, or trim. Use
on properly prepared or previously painted drywall, plaster, masonry,
wood and metal surfaces.
PRODUCT TYPE: 100% Acrylic
SHEEN: Eggshell
VOLUME SOLIDS*: 45% +/- 2%
WEIGHT SOLIDS*: 61% +/- 2%
VOC*: <50 g/L (0.4 lbs./gal.)
WEIGHT/GALLON*: 11.7 lbs. (5.3 kg) +/- 0.2 lbs. (91 g)
*Product data calculated on 37-2310.
COVERAGE: One gallon (3.78 Liters) covers approximately 300 - 400
sq. ft. (28-37 sq. meters) per U.S. gallon (3.78 L) on primed, smooth
non-porous surfaces.
Wet Film Thickness: 4.0 - 5.3 mils
Wet Microns: 102 - 135
Dry Film Thickness: 1.8 - 2.3 mils
Dry Microns: 45 - 58
Coverage figures do not include loss due to surface irregularities and
porosity or material loss due to application method or mixing.
DRYING TIME: Dry time @77ºF (25ºC); 50% relative humidity.
To Touch 1 hour
To Recoat: 4 hours
To Full Cure: 30 days
Drying times listed may vary depending on temperature, humidity, film
build, color, and air movement. Very deep colors may require longer to
fully cure.
WASHING INSTRUCTIONS: Wait at least 30 days after painting
before cleaning the surface with a non-abrasive mild cleaner.
CLEANUP: Clean tools with warm, soapy water. Clean spills
immediately with a damp cloth.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
LIMITATIONS OF USE
FOR INTERIOR USE ONLY. Apply when air, product, and surface
temperatures are between 50ºF (10ºC) and 90ºF (32ºC).
Spray equipment must be handled with due care and in accordance
with manufacturer’s recommendations. High pressure injection of
coatings into the skin by airless equipment may cause serious injury.
Not recommended for use on floors. When Paramount is applied to
an uncoated substrate, two coats are required, with the first coat act-
ing as the primer. For stains, water marks, and challenging conditions
use a premium problem solving primer.
PROTECT FROM FREEZING.
While this product provides a mildew resistant coating, growth may
still occur if the substrate is not properly prepared prior to painting
and/or if the substrate is consistently exposed to conditions conducive
to mold, mildew, and algae.
PACKAGING
Quart (946 mL)
1-Gallon (3.78 L)
5-Gallon (18.9 L)
Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last page.
PARAMOUNT
™
37-3310 Series