SDS

REVITALIZE LIGHT RESURFACER
Product name
4
Product code
Date of issue
Version
41-2903
24 August 2015
Section 8. Exposure controls/personal protection
Respiratory protection
:
Other skin protection
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Respirator selection must be based on known or anticipated exposure levels, the
hazards of the product and the safe working limits of the selected respirator. If workers
are exposed to concentrations above the exposure limit, they must use appropriate,
certified respirators. Use a properly fitted, air-purifying or air-fed respirator complying
with an approved standard if a risk assessment indicates this is necessary.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
Not available.
1.27
Not available.
2.3 kPa (17.4 mm Hg) [room temperature]
Insoluble in the following materials: cold water.
Not available.
Odor
pH
Not available.
Color
Evaporation rate
0.35 (butyl acetate = 1)
Auto-ignition temperature
Flash point
Not available.
Closed cup: >93.33°C (>200°F)
Not available.
Not available.
Viscosity
Kinematic (40°C (104°F)): >0.21 cm
2
/s (>21 cSt)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
>37.78°C (>100°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
Yes.
:
Material supports
combustion.
% Solid. (w/w)
:
50.95
Density ( lbs / gal )
:
10.6
Volatility
:
63% (v/v), 49.05% (w/w)
United States
Page: 7/13