Technical Specifications

ULTRA ADVANCED Deck, Fence & Siding Solid Color Stain
GENERAL DESCRIPTION
PRODUCT DATA
RECOMMENDED SUBSTRATES
FEATURES / BENEFITS
PITTSBURGH
®
Paints ULTRA ADVANCED Deck, Fence & Siding
Solid Color Stain provides a beautiful opaque finish that allows the
wood texture to show through. Our Superior Formulation of 100%
Acrylic resins guarantees ULTRA ADVANCED beauty and
protection. Recommended for use on exterior wood decks, fences,
siding, railings, outdoor furniture and other wood surfaces. May be
used on new wood, pressure-treated wood, weathered wood, and
wood previously stained or painted.
Pressure-treated wood
Weathered wood
Wood decks
Wood siding
For Decks, Fences and Siding
Advanced 2-Way Waterproofing
Ultra U.V. Protection
PRODUCT TYPE: 100% Acrylic Latex
VOLUME SOLIDS*: 34% +/- 2%
WEIGHT SOLIDS*: 46% +/- 2%
VOC*: 166 g/L (1.4 lbs./gal.)
WEIGHT/GALLON*: 10.4 lbs. (4.7 kg) +/- 0.2 lbs. (91 g)
FLASH POINT*: >200ºF (93ºC)
*Product data calculated on 41-2701.
COVERAGE: Approximately 350 to 500 sq. ft. (32.5 to 46.5 sq.
meters) per gallon (3.78 Liters) depending upon wood texture.
Coverage does not include variation due to application methods,
surface porosity, and/or mixing.
DRYING TIME: Normally dries in 30 minutes when applied in temper-
atures of 50ºF (10ºC) to 85ºF (29ºC). Allow 2 to 4 hours between coats
or before recoating. High humidity, low temperature, or color may
prolong drying and recoating times. It is not recommended to apply
product if rain is expected within 24 hours. Allow 24-48 hours drying
time for light foot traffic or furniture placement. Newly stained surfaces
should be allowed to cure 30 days before washing.
CLEAN UP: Clean brushes and tools with warm soapy water.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
PRODUCT INFORMATION
Refer to the color formula book for tinting instructions.
41-2701 White & Pastel Base
41-2702 Clear Base*
41-2703 Outside White
41-2704 Oxford Brown
41-2705 Navajo Red
41-2706 Cedar
*Must be tinted before use.
Some colors, drastic color changes, or porous substrates may
require more than one coat to achieve a uniform finish.
DIRECTIONS FOR USE
Stir thoroughly and often during use. Intermix containers to ensure
color uniformity.
Pretest: Test a small hidden area prior to application to ensure
acceptable appearance and penetration.
T.D. 428 9/2008
APPLICATION INFORMATION
Application Equipment: Apply with a high quality polyester brush,
roller, paint pad, or by spray equipment.
Application Method: Apply two coats. When spraying or rolling,
always backbrush for best results. To help avoid lap marks, apply to
only a few boards at a time keeping a wet edge.
Thinning: Do not thin.
41-2701 Series
®