User's Guide

FCC Certification Requirements
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Note:
This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
-Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Duration and Coverage. One (1) year Limited Hardware Warranty.
Subject to the additional terms and conditions set forth below, Pium
provides the following Limited Warranty only to the person or entity
that originally purchased the Device from Pium or from one of its
authorized resellers or distributors (must register via the Pium app);
Pium warrants the Device against defects in materials and workman-
ship under normal use for a period of one (1) year from the date of
original purchase and with respect to pre-orders from the date the
pre-orders are shipped (“Warranty Period”). If a Device is returned to
Pium during the Warranty Period as provided below, and Pium
determines that the Device is defective, Pium will either repair or
replace the unit with either a new or a refurbished Pium device, or
refund the original purchase price (less any discounts or promotional
codes) in return for the Device, at its option. If the Warranty Period has
expired or is otherwise not applicable as per the Scope and Limitation
on Warranty, we will return the Device to you. More information about
this warranty can be found at http://www.pium.co/support.
1. Pium device is designed to be used indoors in a dry condition. Avoid
liquid contact with the device. Do not submerge the devices in liquid or
attempt to clean them with unauthorized liquids or solvents. To clean
the deivce, disconnect from the power outlet and use a damp towel or
authorized tools.
2. Pium device is designed for residential applications.
3. Do not apply directly to the body or in proximity to the face.
4. Do not disassemble or open Pium smart diffuser. Disassembling and
opening device is very dangerous when it is connected to any power
outlet. Disassembly of the device will void your warranty.
5. There should be at least 1-2 feet clearance for the best performance.
6. No modification of the equipment is allowed.
7. Do not use the power adapter if the cord is damaged.
8. Do not use a different power adapter than the one provided. with the
device.
9. Confirm that your Pium is properly plugged in fully into your power
outlet.
10. Do not use the scent capsule from non-authorized distributors or 3rd
party manufacturers. Warranty will be avoid when unauthorized
capsules are used.
Control
FCC Statement
Warranty
Safety
Specification
Dimension
Weight
Power
Φ3.5in x 7.6in
0.7 lbs
Input : AC 100-240V, 50-60Hz, 1A
Output : DC 12V, 2A
Bluetooth
Wi-Fi
RFID
Bluetooth 4.2
802.11b/g/n/e/i (2.4GHz)
13.56 MHz / 47.544 mV/m @ less than 10m
Product
Model No
FCC ID
Pium Diffuser
P3001
MSIP-CRI-AAAA-FDDDD-FFFFF
1. Open the Pium app, and go to ‘Device’ tab
2. Tab the ‘lightbulb’ icon next to the device name.
White blink
White
Color blink
Color
LED Control
What LED color means
Wi-Fi is disconnected
Device is ready
New scent capsule is recognized
Scent capsule is on
To reset your device by holding
the reset button 5 seconds.
Reset
Bottom
LED On LED Off
Ready New scent capsule ScentingWi-Fi disconnected
White blink White Color blink
Color