Installation Manual

Pivotal Commware® is a registered trademark of Pivotal Commware, Inc.

Page 10 of 32

[3] Apply the item(s) to be bonded within thirty minutes.

Installing Outdoor (ODU) and Indoor (IDU, alignment cling)

Components

Make sure you have carefully selected a good window and performed the required glass cleaning before

installing your Echo 5G.

Installing the ODU on the outside of your window

[1] Remove the strips to expose the adhesive on the rails that are pre-attached to the rail mounting

tool.

[2] Make sure the rails are level and you are mounting the unit at least four inches from any

window edge. Press it against the outside of your window – apply force and hold for 30

seconds.

[3] Run your thumbs up and down the rails, pressing hard for 30 seconds.

[4] Let the rails cure for one hour before sliding the device on.

Wait 60 minutes

[5] Slide the ODU onto the rails.