Installation Manual

Pivotal Commware® is a registered trademark of Pivotal Commware, Inc.

Page 19 of 32

Echo 5G Web Interface

The Echo 5G Web Interface is the same whether it is on a Smartphone browser or laptop browser.

Connecting to Echo via Web Browser

[1] Navigate to web address 10.0.0.1 on your phone’s web browser.

[2] Enter the last six digits of your Echo 5G’s serial number as your password. The serial number

can be found on the bottom of the ODU, the back of the IDU, or on the packaging box.

Serial number shown on bottom of ODU

[3] Once you have entered your password, select Submit.

[4] After submitting your password, the Echo setup will begin. Select Go for the Echo to scan and

align with the strongest 5G beam source. Once scanning is complete, you will see the Setup

Complete screen and can reset and rescan or view the details of the scan.

[5] Should you wish to change your settings at any future time, simply go through this process

again. The setup will skip the second and third screens in the image above and take you right to

the Setup Complete page (as the Echo retains the details of your previous scan). You should

select Reset for the device to re-scan and re-align.