Installation Manual

Pivotal Commware® is a registered trademark of Pivotal Commware, Inc.

Page 32 of 32

Appendix E – Removal Instructions

To remove your Echo 5G, take the following steps.

[1] Loosen the set screws and slide the ODU off the rails

[2] Slide the end of the removal tool under the rails, starting at the bottom and carefully lift the rails

away from the window.

[3] Work your way up the rails from the bottom or side.

[4] When you have loosened the adhesive enough you can carefully remove it by hand.

[5] Use WD40 and the rough side of a sponge to clean any remaining adhesive off your window.

You can use window cleaner to remove any streaks left by the WD40.