Professional LED Photography Light User Manual Sonnon DL-914 Overview Before using this product , you must read the manual and fully understand how to use it and ensure that you can easily handle the operation method and also use it properly .
Precautions 1 Make sure the power adapter, power cable and LED light are installed correctly before power-on. 2 This product involved in electronic product accessories which may cause the failure to use of this 3 Do not put this product in strong vibration, or it may cause fault of this product. device. But this possibility is very low. 4 Power off the device and remove the batteries during long periods of non-use.
Specifications System Mode:FSK 2.4GHz wireless digital transmission system Distance:Over 50M Trigger:Support wired , wireless triggering Antenna:Internal Antenna Power Consumption: Max.54W under steady mode LED Bulbs:900 pcs Trigger: Max. 80W under trigger mode Color Rending Index: 85 Color Temperature: 5600K Lumen: UP TO 4100LM Screen Display: Support Irradiate Distance: Max.
Name of Each Part Brightness Adjustment Dial LCD Screen SYNC Port Group A SYNC Switch A B C D Group B SYNC Switch Group C SYNC Switch DL-A15 V- Mount AC Adapter Trigger Set Switch Adapter Buckle Power Adapter DC Input Port Power Switch Rear View Barndoor Mounting Socket Elastic Nut LED light Panel U-shaped Bracket Front View 4
Name of Each Part Brightness Percentage Battery Icon Transmitter Icon Receiver Icon Lumen Color Filter Color Temperature Parameter Mounting Screw for Color Filter Barndoor Bracket Barndoor Trigger Set Icon Group C SYNC Icon Group A SYNC Icon Side View Group B SYNC Icon Bracket Mounting Screw LCD Screen Brightness Adjustment Dial: Turn this button to adjust LED brightness.
Installation Guide 1、U-Shaped Bracket and Mounting Screw Installation A B C D 1 1 2 2 DL-A15 V- Mount AC Adapter 3 4 2、Power Adapter Installation When installing power adapter, point at LED light and the bayonet of power adapter, and then push to the left to lock it. When removing power adapter, just press the power adapter locker.
Installation Guide 3、Barndoor Installation 4、 Color Filter Installation 7
Product Function Single Use 1、Switch on the power after power-on, LCD screen lights up to show current status and enter to steady mode.Now, the default brightness of this light as Minimum value. (See Figure 1) 2、After entered to steady mode, turn brightness adjustment switch to adjust LED brightness; light brightness divided into 30 levels from Minimum to Maximum, turn clockwise to increase brightness and turn anticlockwise to reduce brightness.
Product Function 2、 After coding succeeded, the brightness of the same groups of the corresponding LED lights can freely adjust and control each other. When group setting is enabled, LCD screen will show the corresponding group. Turn it off to remove it. 3、 When ABC, AB on the same group, if need to adjust the brightness of the lights, subject to the brightness of Group A. When BC on the same group, if need to adjust the brightness of the lights, subject to the brightness of Group B.
Product Function 2、 The group of King Pro transmitter is corresponding as that of LED light. After coding succeeded, it can be triggered as long as the groups of King Pro transmitter and LED light are opened correspondingly. 3、 If multi lights need to be triggered synchronously, just make coding with King Pro one by one. After coding succeeded, all the LED lights can be joined with King Pro for triggering.
