Flashgun I-TTL Trigger Knight TR-331 st This manual is current update of 1 Feb , 2010. Please contact to PIXEL service center for further information, if interesting of the combining usage with products released after this day. PIXEL .INC Http:// www.pixelhk.com Made in China 50703 V10.
Contents Overview Cautions before use About high-performance of knight TR-331 Included items Compatible device The name of each part Basic operation How to use the transmitter of Knight TR-331TX Install the battery Connect the camera with Knight TR-331TX Remove Knight TR-331TX from the camera Turn on the Knight TR-331TX and camera’s power 01 02 03 05 06 07 09 09 09 10 11 12 En
Function mode setting Set Knight TR-331TX channel Turn on the LCD backlight of Knight TR-331TX How to use the receiver of Knight TR-331RX Install the battery Install the receiver Turn on the Knight TR-331RX power En Function mode setting Knight TR-331RX channel setting Turn on the LCD backlight of Knight TR-331RX Connect Knight TR-331RX with the flash Remove the flash from Knight TR-331RX The flashgun operation PIXEL TR-331 Specifications 13 16 17 18 18 19 21 22 23 24 24 25 26 27 Overview First of all ,T
Cautions before use En 21 1. Knight TR-331product will not support the creative CLS system of Nikon wireless flashgun. 2. Make sure the camera and flash are powered off before install TR-331 device 3. This is electronic products accessories; some of the environment causes may affect the working. However this is hardly ever to get this situation, don’t worry! 4. This component can’t be strong vibration, or may lead to product failure. 5.
About high-performance of Knight TR-331 Included items Please check all the below items in Knight TR-331 packaging before use. Knight TR-331TX is more than 1000 hours, the receiver Knight TR-331RX standby time is more than 500 hours. Knight TR-331 Functions En 1 Knight TR-331TX Simultaneously control multiple flash or studio lights. Support for flash’s auto-focus feature. Support a variety of shutter speeds, its max up to 1 / 8000s.
Compatible device Knight TR-331TX compatible device En Compatible with Nikon CLS DSLR cameras D3, D700, D2 series, D300, D200, D90, D80, D70 series, D5000, D3000, D60, D50, D40 series, F6 and so on. Compatible with Nikon I-TTL COOLPIX Camera COOLPIX8800, COOLPIX8400, COOLPIX P5000, COOLPIX P5100 and so on. Compatible with other DSLR camera compatible with Fujifilm and Nikon flash camera. Knight TR-331RX compatible device Compatible with Nikon's flash SB-900, SB-800, SB-600, SB-400.
Basic operation The name of each part Knight TR-331TX How to use the transmitter of Knight TR-331TX Low-voltage signs Set mode En Set channel LCD POWER/CHBattery hatch LED SET/CH+ Fixed nut of hot shoe Hot shoe accessory 8 Install the battery 1. Slide the battery hatch cover, open it. 2. According to the figure signs [+] and [-]install the battery correctly, or contrast the product Knight TR-331TX sign [+] and [-] for battery inserting. 3. Close the battery hatch. 4.
How to use the transmitter of Knight TR-331TX En How to use the transmitter of Knight TR-331TX Connect the camera with Knight TR-331TX Remove Knight TR-331TX from the camera 1. Please make sure the camera and the transmitter’s power supply had been turned off before installed Knight TR-331TX. 2. Loose the hot shoe nut by rotating to right according to picture 1. 3. Follow picture2 to insert the Knight TR-331TX hot shoe accessory to the camera's accessory shoe 4.
How to use the transmitter of Knight TR-331TX En 12 How to use the transmitter of Knight TR-331TX Turn on the Knight TR-331TX and camera’s power Function mode setting 1. Turn on the Knight TR-331TX and camera power. 2. Turn on the Knight TR-331TX power, follow the figure to hold [ POWER ] for 2s then release. 3. If Knight TR-331TX power is on, hold [POWER ] for 2s then release, Knight TR-331TX will enter into power off mode. 4.
How to use the transmitter of Knight TR-331TX set function mode of next group and the LCD show as [ ]. You’ll need to set all the groups from group A to group E respectively. F. You can press [ POWER ] gently to set the parameter of each group, the function mode include OFF and TTL. En If set group A as OFF mode, all receivers of group A will not participate to flash.
How to use the transmitter of Knight TR-331TX How to use the transmitter of Knight TR-331TX Set Knight TR-331TX channel En 16 1. Turn on the Knight TR-331TX power ,press [ CH- ] and [ +CH ] button 2s at same time for communicate channel setting of the transmitter. 2. After pressed the [ CH- ] and [ +CH ] button, LCD display shown [ ] , " " means channel number, such as shown , enter the setting mode. 3.
How to use the receiver of Knight TR-331RX Install the battery En 1. Slide the battery hatch , open it. 2. According to the figure signs [+] and [-] install the battery, or contrast Knight TR-331RX product sign [+] and [-] for the battery inserting. 3. Close the battery hatch. 4. When the battery power is low, the LCD is displayed [ ] as shown, Knight TR-331RX need to replace the batteries as soon as possible to ensure normal flash shooting.
How to use the receiver of Knight TR-331RX How to use the receiver of Knight TR-331RX Turn on the Knight TR-331RX power Install Knight TR-331RX receiver on the flash bracket Turn on the Knight TR-331RX power then set the function mode and channel before install the flashgun for receiver. 1. Turn on the power of Knight TR-331RX, hold [POWER] 2s button for 2s then the power is turned on. 2.
How to use the receiver of Knight TR-331RX Function mode setting Knight TR-331RX channel setting 1. When first install the batteries in the receiver, the LCD will show[ ], as shown. 1. Turn on the Knight TR-331RX power ,press [ CH- ] and [ +CH ] button 2s at same time for communicate channel setting of the receiver. 2. After pressed the [ CH- ] and [ +CH ] button, LCD display shown [ ] , " " means channel number, such as shown , enter the setting mode. 3.
How to use the receiver of Knight TR-331RX 5. Please confirm whether the channel is corresponded with the transmitter or not after the setting of Knight TR-331RX channel. Turn on the LCD backlight of Knight TR-331RX En Turn on the Knight TR-331RX power, it is available to open the LCD's backlight through press [SET ], the backlight will turn off in 4s automatically when no action on [POWER ] and [SET ]. Connect Knight TR-331RX with the flash 1.
How to use the receiver of Knight TR-331RX PIXEL TR-331 Specifications The flashgun operation 1. 2. 3. 4. En Adjust the flash head after the flash installed. Turn on the flash power. Select the flashgun’s mode. Make sure the flash or camera light has been lit in the preparation before shooting. Type: Using FSK 2.
