User's Manual

1 91 8
2
1
1
2
Install Knight TR-331RX receiver on the tripod.
EnEn
How to use the receiver of Knight TR-331RX
How to use the receiver of Knight TR-331RX
Install the battery
1.
2. According to the figure signs [+] and [-] install the battery,
or contrast Knight TR-331RX product sign [+] and [-] for
the battery inserting.
3. Close the battery hatch.
4. When the battery power is low, the LCD is displayed
[ ] as shown, Knight TR-331RX need to replace
the batteries as soon as possible to ensure normal flash shooting.
Slide the battery hatch , open it.
Battery required: 3V CR-2 lithium battery, standby time more than 500 hours
Install the Receiver
1. Follow picture 1to insert
the receiver screw nut on
the tripod, make it tightly.
2. Follow picture 2 to install
the receiver on the tripod.