User's Manual

3
2
1 110
1
1
2
EnEn
Connect the camera with Knight TR-331TX
How to use the transmitter of Knight TR-331TX
1. Please make sure the camera and the transmitter’s power supply had been turned off
before installed Knight TR-331TX.
2 Loose the hot shoe nut by rotating to right according to picture 1.
3. Follow picture2 to insert the Knight TR-331TX hot shoe accessory to the camera's
accessory shoe
4. Follow picture 3 to rotate the fixed hot shoe nut to the left for locking.
.
Lock the fixed nut hot shoe of transmitter in place to prevent the products slide from the camera
How to use the transmitter of Knight TR-331TX
1.
power had been turned off before remove TR-331TX.
2. Loose the hot shoe nut by rotating to right according
to figure 1.
3. Pull out Knight TR-331TX hot shoe mount from the
camera accessory shoe.
Please make sure the camera and Knight TR-331TX
Knight TR-331TX hot shoe nut is not loosed, please loose it, and gently pulls it
from the camera's accessory shoe, do not forcibly pull it.
If Knight TR-331TX can’t pull out from the camera's hot shoe:
Remove Knight TR-331TX from the camera