Operation Manual

Instructions

PIXEL ENTERPRISE LIMITED

Remote Control

RC-201

Thank you so much for purchasing PIXEL product and read this instruc-

tion; Our unremitting strive power is for increase your interested of pho-

tography. You can easily to understand“how to use”and “condition”

from this instruction manual. Remote control RC-201 is having the con-

trol shutter release function, just connect to all famous brand profes-

sional camera (which have the shutter socket) shutter plug, then easily to

use the shutter release to take a picture. For more information, please

read the camera instruction manual.

Caution

1. This is an electron product accessor y; some of the environment

causes will be effected the working. However this is hardly ever to get this

situation, don't worr y!

2. Remove the continuous mode before store this product for long

time.

3. When the remote control is connected to camera, please do not pull

and drag the cable.

4. Please do not store this product into high temperature location,

such as car internal or control panel these high temperature area.

5. Please keep it dry and do not get wet; also cannot put in water or use

under raining day.

6. Please do not use it in the presence of flammable or gas, it could

cause an explosion or fire.

Installation

1. To prevent any unexpected matter, please turn off the camera power.

2. Open the shutter socket cover from camera, and plug in the remote

control plug to the correct direction. (some plugs are the spiral plug, roll

the lock to clockwise and tight it. When take off from camera, just roll the

lock to anti-clockwise and release it.)

3. Now turn on the camera power, then start to take the wonderful

picture.

PAGE 1
PIXEL ENTERPRISE LIMITED Remote Control RC-201 Instructions Thank you so much for purchasing PIXEL product and read this instruction; Our unremitting strive power is for increase your interested of photography. You can easily to understand“how to use”and “condition” from this instruction manual.
PAGE 2
Directions 1. Half press the release button, to start the camera auto-focus, let focus on the main point; then fully press the release button to take a picture. 2. Locking mode, (Please set the camera to continuous or BULB mode). Fully press the release button and lock the button. It's locked the camera to start the continuous shoot or long exposure. 3. Remove locking, let pull down the lock, then release the button.