Timer Remote Control 有线定时快门线 TC-252 PSM47 V10.
Contents Overview Cautions TC-252 introduction The name of each part Prepare for install and use Install and replace the battery Connection with the camera Open the background light of display Shooting control Single shooting Continuous shooting within one second [ ]shooting Delay shooting Timing plan for shooting PIXEL TC-252 Specifications 02 03 04 05 07 07 08 09 10 10 11 13 14 17 24 This manual is current update of 1st Mar, 2012.
Overview Thank you for purchasing high-performance PIXEL products First of all, thank you for purchasing product of PIXEL. TC-252 is a high quality wired timer remote control with the function of single shooting, continuous shooting per second,[ ]shooting, user-defined time-delay and timing plan for shooting. Low consumption of LCD display will make you be clear at a glance of the using status and using plan.
TC-252 introduction LCD display shows the channel, power, function mode. It’s easy to understand and operate. Low power consumption when standby; standby time more than 3 years using 2pcs AAA batteries. Support single shooting, continuous shooting within one second, [ ] shooting and user-defined delay and timing plan shooting . The device support to control different brand or style of cameras by using different shutter connect cable.
Preparation for installation and use The name of each part DC0 Display 9 10 11 12 13 DC1 DC2 E3 N3 RS1 S1 UC1 1 Install and replace the battery 1 2 2 3 Shutter connect cable 4 5 6 7 8 Display 1 3 5 7 9 11 6 Timing plan function area Function area Continuous shooting within one second icon Delay shooting icon The icon of delay time The icon of interval time Before use, you should read the user manual of your camera carefully; understand the manipulation and functional setting.
Preparation for installation and use Connection with the camera Preparation for installation and use Open the background light of display 1. First, fix the camera on the tripod or other fixed bracket. 2. Open protective cover of external shutter socket and put the shutter plug of shutter connect cable in place, then make sure it has been fixed firmly. For most of camera shutter socket, there is mis-plug interface, please note insert direction so as to avoid damage to shutter socket.
Shooting control Shooting control Sketch map for selecting function mode: Single shooting function Press Press Press Press Press Press Continuous shooting within one second function [ ]shooting function Part of the cameras can't support to wake up the external shutter, it's unable to wake up the external shutter and take photo when the camera is dormant.
Shooting control one second icon[ right move button[ ]as the function one by pressing the left move button[ ]. Shooting control ]or Continuous shooting within one second is one patent function which issued by Pixel limited Enterprise, it'll support spacing continuous shooting within one second and never change the single shot mode of the camera. 2. Half-press the release button, the green light lit, and the camera is in the focusing state until release or full-press the button. 3.
Shooting control The differences between[ ]mode and[ ]mode are as follow: [ ]function is the release button is pressed fully and keep on, shoot every second and stop shooting until the release button is released. While[ ] function is the camera will start shooting when the release button is pressed fully until press it again, the shooting will stop. Make sure to set the camera function to be [ ]. When the camera function is set to be [ ], the camera only shoot once but not[ ] shooting.
Shooting control Operate the delay shooting 1. Press the left button[ ]or right button[ ], move the activity icon to the delay shooting icon[ ]. 2. Half-press the release button, the green light lit, and the camera is in the focusing state until the release or fullpress the button. 3. Full-press the release button, timer remote control start to delay countdown, red indicator blink quickly and enter to the delay shooting mode. 4.
Shooting control The shot number of timing plan setting Shooting control Press Press Press Press Press Press Press Press Delay time of timing plan--hours setting Delay time of timing plan--minutes setting Exposu -re time of timing plan setting Delay time of timing plan--seconds setting Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly increased; Press the button[ ]once to set the numerical reduced, hold on to set the values rapidly reduced. 4.
Shooting control Shooting control 3. By pressing button[ ]or[ ],enter into the setting for “minutes” and “hours”, “delay time”, “exposure time”,“shots number” as the sketch map. 2. Press the set button, entering to set the number plan to shot. Press button [ ]setting shot number can be increased, press button [ ], settings shot number can be decreased. It can be set between 1 to 99 sheets. 3.
Shooting control Press Delay shoot -ing functio n Press Press Press Shooting control Press Press Press Press Execute timing plan 1. Press the left move button[ ]or right move button[ among the timing plan shooting area. Press Press Singl e shoot -i ng func ti on ], move to any icon 2. Press the timing start/stop button[ ], the timer remote control will execute timing plan, indicator flash red once and task start executing.
PIXEL TC-252 Specifications Standby time: More than 3 years Using battery: 1.5V×2AAA Dimensions(W×H×D):149mm×49.5mm×24mm Weight(with batteries):70.5g Now you can start to use unique high-performance PIXEL product TC-252. If you have any questions, you can contact the local distributor. Or visit the website http://www.pixelhk.com.