May 2011. Flashgun Power Pack Ce manuel a été mis à jour le 1er Mai 2011 . Si vous voulez utiliser ce produit en combinaison avec un autre produit Pixel de productionultérieure, veuillez consulter votre revendeur Pixel pour toutes informations Accumulateur portatif TD 38X pour flash Product Manual Manuel d'instructions PIXEL .INC Http:// www.pixelhk.com Made in China Fabriqué en Chine PSM9 V20.
Catalogue Overview Cautions before use Feature of the flashgun power pack Included items Compatible device The name of each part Using of battery Using of flashgun power pack Specifications of flashgun power pack 02 03 06 07 08 09 10 11 15 1
Overview Thank you for purchasing high-performance PIXEL products Thank you for purchasing the Pixel Flashgun Power Pack. Compatible with specific Canon, Nikon and Sony Flashguns. The power pack will supplement the power provided by the flashgun, thereby increasing the total number of flashes and decreasing the recycle times. The power pack can be used with either 4 or 8 AA batteries. Please read the complete manual and ensure you understand the instructions before using this product.
Cautions before use Cautions before use If heat, smoke or a burning smell is detected, immediately stop using. Remove batteries to prevent further damage. Take the product to your local Pixel dealer or authorized service center for repair. Do not use the power pack in the presence of flammable or explosive gases, including propane, gasoline and dust, doing so may cause an explosion or fire. Keep this product away from children. Do not touch the flashgun power pack with wet hands.
Features of flashgun power pack Uses two groups/banks of batteries to symmetrically charge system, enables greater charging power and faster recycle times. Flexible and convenient to use, choose charging from single or dual banks. Lower standby power consumption and higher charging efficiency than other similar products.
Compatible device The name of each part 5 Model Compatible types of flashgun TD-381 Canon flashgun: 580EXⅡ,EX580, EX550,MR-14EX, MT-24EX TD-382 TD-383 Nikon flashgun: SB-900 Nikon flashgun: SB-800,SB-80DX, SB-28DX, SB-28, SB-27, SB-26, SB-25, SB-24, SB-22, SB-20, SB-11 4 TD-384 3 2 TD-381 TD-382 TD-383 TD-384 Sony flashgun: HVL-F56AM 1 11 10 The standby power consumption of TD-382, TD-383 and TD-384 is minute.
When replacing batteries, replace all four batteries of each set at the same time. Do not mix battery types or brands or use old with new batteries. When installing batteries, turn off the power of the flashgun and never reverse the polarity of the batteries. 10 Install the battery Use the same type of four or eight AA type refill batteries of any of the following types. Alkaline-manganese(1.5V) lithium(1.5V) Ni-MH(Nickel Metal Hydride)(1.2V) 1.
Using of flashgun power pack Using of flashgun power pack Connect to flashgun 3. Insert four or eight batteries. A B Plug the power pack cord to the flashgun external power source terminal. Batteries must be installed in the flashgun and must have enough power to turn on and power the controls. The type, brand and level of available power must be the same. 4.
Using of flashgun power pack Indicator status B A 1. The indicator light will be lit when the power pack is operating normally. 2. The indicator light will flash when low battery level is detected or when there are no batteries installed. TD-381, due to Canon's different system design, the indicator will light when charging, flash rapidly when on standby and flash slowly when low battery or no battery is detected.
