Operation Manual

1 3
1 2
Connect to flashgun
Fixed flashgun power pack
3. Insert four or eight batteries.
The type, brand and level of available power must be the same.
4. Ensure battery hatch and power pack body are both in
the upright position Insert the battery hatch into power pack
body, battery hatch is spring loaded and may require a little
pressure to close the battery hatch completely. Slide the
battery hatch lid until it locks in place.
Plug the power pack cord to the flashgun external power
source terminal.
Insert the supplied camera attach screw to the flashgun power pack
tripod socket.
A
B
Using of flashgun power pack Using of flashgun power pack
1 2 3
If the battery hatch lid is slid into the closed lock position before
the battery hatch is completely in the power pack body, the lock
release button must be pushed and the hatch lid slid into the
unlock position before reattempting to close the hatch lid.
Batteries must be installed in the flashgun and must
have enough power to turn on and power the controls.