Operation Manual

2 0

Shooting control

Delay shooting

Delay shooting setting

The delay shooting function of TW-282 can user-defined the delay time and shots.

1. In the power-on state, move the transmitter’s activities

icon to delay shooting icon[ ] by pressing the move

button[ ]or right move button[ ]. Press the set button

entering the delay setting for adjusts the shooting numbers.

The delay shooting icon[ ],number of shooting [ ]will blink

at the same time.

left

2. Press button[ ]settings shot number can be increased,

press button [ ], settings shot number can be reduced. It can

be set between 1 to 99 sheets .

3. Press button[ ]enter into the delay setting of delay

shooting. delay shooting time

value[ ]will blink at the same time.

the delay shooting icon[ ] ,

4. Press the button[ ], set the delay time increased, press

button[ ], set the delay time reduced. It can be set between

1 to 59 seconds.

2 1

5. After set up the new parameters, press the set button, save and exit settings.

When enter to the delay shooting set, the transmitter will save the

previous setting.

By pressing the left button[ ]or right button[ ], convert shooting

numbers and delay time settings.

Gently press button[ ]once to set numerical increased, hold it on,

set the value rapidly increased; Press the button[ ]once to set the

numerical reduced, hold on to set the values rapidly reduced.

Operate the delay shooting

Press the left button[ ]or right button[ ], move the

transmitter’s activity icon to the delay shooting icon[ ].

Half-press the release button and transmitter will send

signal for focusing, the green indicator will lit on the

transmitter and receiver, and the camera is in the focusing

state until the release or full-press the button.

Full-press the release button, transmitter will send all the

delay shooting information to receiver, the transmitter

starts to delay countdown, and red indicator blink quickly

and enter to the delay shooting mode.