Operation Manual

2 5
2 4
Shooting control
Shooting control
Exposure time setting
1. Press left move button[ ]or right move button[ ],
move the transmitter’s activities icon to the exposure
timing program icon[ ].
2. Press the set button, enter the delay time for ‘second
bit’ setting.
3. By pressing button[ ]or[ ],enter into the setting for minutes and hours ,
as the sketch map.
“ ” “ ”
Press
Press
Press
Press
Press
Press
Press
Press
Exposure time of timing
plan--hours setting
Exposure
plan--minutes setting
time of timing
Exposure
plan--seconds setting
time of timing
Delay
time
of
timing
plan
setting
Interval
time
of
timing
plan
setting
Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly
increased; Press the button[ ]once to set the numerical reduced, hold on to set the
values rapidly reduced.
4. Press the set button, save and exit settings.
Interval time setting
1. Press left move button[ ]or right move button[ ], move
the transmitter’s activities icon to the interval timing program
icon[ ].
2. Press the set button, enter the time for second bit
setting.
interval “ ”
3. By pressing button[ ]or[ ],enter into the setting for minutes and hours , as
the sketch map.
“ ” “ ”
Press
Press
Press
Press
Press
Press
Press
Press
Interval time of timing
plan--hours setting
Interval
plan--minutes setting
time of timing
Interval
plan--second setting
time of timing
Exposu
-re
time
of
timing
plan
setting
The
shot
number
of
timing
plan
setting
Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly
increased; Press the button[ ]once to set the numerical reduced, hold on to set the
values rapidly reduced.
4. Press the set button, save and exit settings.