Operation Manual

1 1

1 0

Fix the receiver (TW-282RX)

The receiver(TW-282RX)

3. Close the battery hatch.

2. Follow the signs of positive [ + ] and negative [ - ] in the

battery compartment to install the battery correctly.

You should pay attention to the polarity of battery because of the

wrong installation will make the device work abnormally, or even

physical injury.

You should pay attention to the polarity of battery because of the

wrong installation will make the device work abnormally, or even

physical injury.

The low battery voltage icon[ ]will twinkle when the power is

not enough, that means the low battery voltage has already

influenced the normal work of the device, which needs to

replace the battery in time. The receiver uses CR-2 lithium

battery; Please follow the steps to replace the battery if needed.

1. Slide and open the battery hatch.

2. the signs of positive [+] and negative [-] in the

battery compartment to install the battery correctly.

Preparation for installation and usePreparation for installation and use

Receiver can be fixed on the top of camera, rack of camera accessory or tripod.

Fix the receiver on the hot shoe of camera.

Fix on the rack of camera accessory.the receiver

Fix on the tripod.the receiver

Loosen hot shoe fixed nut when you remove .

forcibly pull it, in order to avoid damage to the receiver and

camera.

the receiver Do not

Lock hot shoe fixed nut tightly when you fix it.

Make sure to fix firmly so that it will not slide.the receiver

1. Fix the Receiver on the quick release plate through

bottom nut.

2. Attach the quick release plate on the tripod.

TW-282RX