user manual

Go to next page
17
Error Messages
Errors in Main Screen
No
Error Message or
Error display
Cause Measure
1 "The selected drive cannot
be found. Select a different
drive."
Reading or writing drive does
not exist.
Reselect the reading or writing drive.
2 "You do not have the
privileges to access the
selected drive. Select a
drive you can access."
You do not have the
privileges to read and write in
the selected work drive.
Change the work drive. Or set the
privileges to access in the work drive
to Full Control by following the steps
below. (For Windows 2000)
1. Double click the [My Computer] icon.
2. Right-click the work drive you selected.
3. Select [Properties].
4. Select [Securities] tab.
5. Confirm that “Everyone” is selected in
[Name].
6. Put a check in [Allow] for “Full Control” in
[Permissions].
7. Click [OK].
Errors when reading data
No
Error Message or
Error display
Cause Measure
1 "Not enough space in work
drive. Increase the free
space in the work drive. Or
change the work drive."
Not sufficient free space in
the work drive.
Increase the free space in the work
drive. Or change the work drive.
Disk space required in Work Drive:
For DVD-Video/DVD-VR:
Reading DVD data size + 1GB
For DVD+VR:
Reading DVD data size times 2 + 1GB
2 "Failed reading data.
The drive may not be
connected."
Reading drive is not
connected.
Check the reading drive connection.
What should I do when...