Installation Guide

PACKAGE CONTENTS

Two-wire connector

Mounting Plate Wire nuts (3)

Toggle Bolts (4) Dry wall screws (4)

Junction box screws (2)

Ground wire Install Bracket

BEFORE YOU BEGIN

Read these instructions completely and carefully

WARNING

RISK OF ELECTRIC SHOCK

• Turn power off before inspection, installation or removal.

• Properly ground electrical enclosure.

RISK OF FIRE

• Follow all NEC and local codes.

• Use only UL approved wire for input/output connections.

Minimize size 18 AWG (0.82mm).

• Do not install insulation within 3 inches (76 mm) of luminaire top.

For Use with 120V only

SAVE THESE INSTRUCTIONS Use only in the manner intended by the manufacturer.

If you have any questions, contact Pixi Lighting 888-925-7494.

STOP