Installation Guide

T-GRID INSTALLATION
1 Carefully unpack FlatLight from its packaging. Properly inspect for
defects before installing. Wear work gloves in order to prevent
dirt or oil from being transferred to the FlatLight.
2 Turn off the electric power to light source at the main fuse or
breaker panel.
3 Locate mounting tabs found on the rear of
FlatLight. Bend tabs in desired position prior
to placing FlatLight in the ceiling grid.
4 Insert FlatLight into T-bar ceiling grid. Unit should be secure and
not moving inside grid.
5 As required by local building code, secure FlatLight to the concrete/
plywood or metal decking above the t-bar grid utilizing the
mounting tabs.
6 Remove wiring compartment cover on the back of the FlatLight.
Carefully remove knockout on wiring compartment cover. Locate
electrical conduit and separate the wires.
ENGLISH
2
Continued on next page...