Installation Guide

3
7 Route electrical conduit wires through wiring compartment cover
and secure.
8 Connect the hot wire from the power source to the black wire(s)
found on the FlatLight with the wire nut provided.
9 Next connect the neutral wire from the power source to the white
wire(s) found on the FlatLight with the wire nut provided.
10 Connect green ground wire to the back of the FlatLight.
11 Insert connected electrical wires including
the wire nuts into the wiring compartment.
Reattach wiring compartment cover to
original location.
12 Remove protective film from the face of the FlatLight.
13 Turn on electrical power to light source at the main fuse or
breaker panel.
T-GRID INSTALLATION CONTINUED
A
A
ENGLISH