Specifications

E-Mail: [e-mail] Web: pixltile.com
Field Tile
Available in all colors
Nominal (in) Actual (mm)
Thickness (mm) Finish
6 x 24 147 x 597 10.5 Unpolished/Semi-Polished
12 x 24 297 x 597 10.5 Unpolished/Semi-Polished
24 x 24 597 x 597
10.5 Unpolished/Semi-Polished
24 x 36 597 x 897 10.5 Unpolished/Semi-Polished
24 x 36 597 x 897
10.5 Unpolished/Semi-Polished
A minimum grout joint of 3mm is recommended.
Product Performance
Breaking Strength >500 lbf ASTM C648
Bond Strength >200 psi ASTM C482
Chemical Resistance Unaffected ASTM C650
Frost Resistance Resistant ASTM C1026
Water Absorption <0.30% ASTM C373
Scratch Hardness 7 Mohs Scale
Wet Dynamic Coefficient of Friction Range
Unpolished
0.50 - 0.60
AcuTes t
sm
Semi-Polished 0.42 - 0.52
AcuTes t
sm
Shade & Texture Index
Refinery has a shade variation of V2.
Coordinating Trim
Available in all colors
Nominal (in) Actual (mm) Thickness (mm) Finish
4 x 24 Single Bullnose
96 x 597 10.5
Unpolished/Semi-Polished
6 x 12 Cove Base
150 x 297 10
Unpolished
Sizes (shown in Shadow) Sizes and Finishes
Refinery is recommended for
interior floors, walls, counter
tops and exterior walls in both
residential and commercial
applications. If an offset pattern
is required for tiles 18 inches
or longer, PIXL recommends an
offset of not greater than 33%.
This PIXL porcelain tile includes a proprietary surface finish that imparts a subtle
glow, enhancing the color of the tile and allowing many stains and scuff marks to be
easily wiped off the surface. This extraordinary finish helps keep your living areas
looking their best.
Recommended Uses
Easy-Clean Surface
Porcelain Tile
Refinery
V2 V3 V4V1
V1 Uniform appearance
V2 Slight Variation
V3 Moderate Variation
V4 Substantial Variation
This porcelain tile product is produced with a V2 variation. Expect that the amount of
color and texture on each piece may vary slightly. Inspect the product upon delivery
and for best results, blend tile from several cartons during installation.
4 x 24 Single Bullnose
6 x 12 Cove Base
24 x 24
24 x 36
12 x 24
6 x 24
Mosaics and Mosaic Border
Nominal (in) Actual (mm) Sheet (mm) Thickness (mm) Finish
1 x 3 Mosaics
†
22 x 72 297 x 297 10.5 Unpolished
1 x 3 Mixed Mosaics
†
*
22 x 72 297 x 297 10.5 Semi-Polished
1 x 3 Mosaic Border**
47 x 334.5 10.5 Metallic
†1 x 3 mosaics mesh mounted in 11-7/8 x 11-7/8 sheets.
* Semi-Polished finished only. ** Mounted on a 2 x 13 sheet and wall use only for the metallic border (Globally sourced).
Information listed here is subject to change. Please refer to pixltile.com for the latest, most accurate information.