Installation Guide

2. Windows 7 / 8 / 8.1 / 10

This example uses Windows 7, but if you have Win 8 or 10, the steps are the same.

Step 1. Once the wireless USB adapter is plugged into a USB port, insert the CD and locate Setup.exe in

the folder “windows” in the disc directory. (If you do not have a CD-ROM slot in your computer, please

download the driver from netdynwifi.com)

Step 2. Double click on the Setup.exe file, then continue the installation wizard.

Step 3. You will have to restart your computer for the installation to finish. Click “Yes, I want to restart

my computer now.” to finish the installation. You may choose to restart it later if you do not wish to

restart the computer immediately, but you will not be able to use the adapter without restarting.

Step 4:

There are two ways to access your network:

Using the Windows Utility:

Step 4a. Click on the Icon in the Windows system tray, which is located in the bottom-right corner

of your computer screen and then double click the SSID you preferred (or click “connect” button)