Datasheet

2D
2/126
General Catalog 2011-2012
Rotating actuators
Thanks to the new lateral fixing system
patented, it’s possible to rotate the roller of
microswitches MK •••15 and MK •••17 in
90° steps.
The lateral fixing allows to disconnect the
actuator from the body also when the
actuator is already fixed to the racket. The
flexibility of the product allows also to unify
items on stock for applications that require
roller both longitudinal or transversal.
Protection degree IP65
By installing microswitches MK ••2••• with terminal covers VF
MKC•22 or terminal covers VF MKC•23, it’s possible to obtain a
microswitch fully dust proof and waterproof.
Thanks to special rubber gaskets anti-oil, we achieve the
protection degree IP65.
For application with high presence of dirtiness, are available
also versions with double gasket in the push button ( internal +
external). ex. MK ••2•12 or MK ••2•13.
Microswitch:
MKV12D12
Terminal cover:
VF MKCV22
Clamping screw plates for different diameter cables (MK V•)
Terminal covers with wire trap cable gland side by side
These clamping screw plates have a particular “roofing tile” structure and are connected loosely to
the clamping screw. In this way, during the wires fixing, the clamping screw plate is able to suit to
cables of different diameter (see picture) and tends to tighten the wires toward the screw instead
of permitting them to escape towards the outside.
New terminal covers supplied with wire
trap cable gland are provided for the
protection degree up to IP65.
These terminal covers are snap-in
assembled and they have small
dimensions in the microswitch profile,
it’s possible to install them also on
microswitches fixed side by side.
See page 2/136.
Gaskets