Datasheet

3B
1
2
General Catalog 2011-2012
3/11
Joining devices for modular multiple foot switches
Article Description
VF KIT20
Joining devices
Foot switches joining
device made of polymer
thermoplastic resin with
a hole for a carrying
rod, complete with
nuts, gaskets and
self-tapping screws to
fasten two single foot
switches.
Protection degree IP65.
Article Description
VF KIT30
Joining devices
Foot switches joining
devices made of polymer
thermoplastic resin with
threaded hole M25x1,5
(for VF KIT31 - VF KIT29)
complete with nuts,
gaskets and self-tapping
screws to fasten two
single foot switches.
Protection degree IP65.
All single foot switches are equipped with knock-out openings on their sides, where the threaded end of the joining kit will be inserted. By
clamping the threaded nuts of the joining kits you create a sealed cable conduit from one foot switch to the next.
Then, with the supplied screws, the joining kits allow the mechanical clamping and the stabilization of the two (or more) single foot switches in
a single object.
How to join several foot switches Pat. pending
Besides the possibility of joining two to four single foot switches, the joining kits offer the possibility to install a carrying rod or an metal pipe.
The metal pipe allows the electrical connection between the contact blocks of foot switches and an emergency push button connected through
the same pipe, keeping a protection degree IP65.
Modular multiple foot switches PC series