User Manual

ManualsBrandsPJRC Manuals32 Bit MicrocontrollersTeensy++ 2.0 USB Microcontroller Development Board

2/8/2018 Teensy Loader app for Windows 7 and Vista

https://www.pjrc.com/teensy/loader_win10.html 1/4

Using The Teensy Loader on Windows

Vista

Update: Teensy 3.0 is supported by Teensyduino. After installation, Teensy Loader is in

hardware/tools. It is run automatically when using Verify or Upload within the Arduino software. This

version on this web page has not been updated for Teensy 3.0. Please insta ll Teensyduino to use

Teensy 3.0.

Files to download:

Teensy Loader Program

LED Blink, Both Slow & Fast

TEENSY.EXE is a single file application, so there is no installer required. You may copy it anywhere

on your computer.

Simply double click the application to run it.

Older versions of Windows may ask you to confirm running the program. This window should show

"PJRC.COM, LLC" as the publisher.

Summary of content (4 pages)

PAGE 1
2/8/2018 Teensy Loader app for Windows 7 and Vista Using The Teensy Loader on Windows Vista Update: Teensy 3.0 is supported by Teensyduino. After installation, Teensy Loader is in hardware/tools. It is run automatically when using Verify or Upload within the Arduino software. This version on this web page has not been updated for Teensy 3.0. Please insta ll Teensyduino to use Teensy 3.0. Files to download: Teensy Loader Program LED Blink, Both Slow & Fast TEENSY.
PAGE 2
/8/2018 Teensy Loader app for Windows 7 and Vista The Teensy Loader should appear as a small window. If the Teensy board is running the LED blink, or not connected, you should see this window. If HalfKay is running, you should see this. If not, simply make sure your Teensy board is connected, and press the pushbutton to run HalfKay. The Teensy Loader will quickly recognize it. https://www.pjrc.com/teensy/loader_win10.
PAGE 3
2/8/2018 Teensy Loader app for Windows 7 and Vista From the File name, choose "Open HEX File" and open blink_fast.hex, which you downloaded using the link at the top of this page. You can also open the file using the toolbar button, or using drag-anddrop onto the upper portion of the window. When the file is opened, the filename and percentage usage of the Teensy's memory are shown. Select "Program" from the "Operations" menu, or click the Program button on the tool bar.
PAGE 4
2/8/2018 Teensy Loader app for Windows 7 and Vista When you press the button on your Teensy board, Automatic Mode will quickly program and reboot your board. Normally, while working on a project, you can leave the Teensy Loader in Automatic Mode. Teensy Loader always reads the latest version of your HEX file, so you can just compile your code, then press the pushbutton to program and run your code. https://www.pjrc.com/teensy/loader_win10.